Overview
GenRight Fastback roll cage. 6-point with integrated harness bar and gusseted A-pillar tie-ins. Built to survive the dumb ideas. This thing has already paid for itself multiple times.
Tools Needed
- • MIG/TIG welder
- • Angle grinder with cutoff and flap wheels
- • Socket set and wrenches
- • Drill and bits
- • Clamps and squares for alignment
- • Measuring tape and marker
Materials Used
- • GenRight Off Road Fastback Roll Cage (TJ)
- • Welding wire or rod (matching tubing)
- • Powder coat or paint for finish
- • Hardware for mounting (bolts, tabs)
Estimated Time
Approximately 16-24 hours (including fitment, welding, and finishing).
Installation Steps
Remove Interior and Old Cage (if any)
Strip the interior, remove any existing cage or roll bar. Clean the tub thoroughly.
Fit the GenRight Fastback Cage
Position the 6-point cage in the tub. Align with A-pillar and B-pillar tie-ins. Clamp and check fitment.
Weld the Cage in Place
Tack weld first, check alignment, then fully weld the gussets and harness bar. Use proper technique for 1.75" DOM tubing.
Finish and Powdercoat
Grind welds smooth, clean the cage, and apply powdercoat or paint in semi-gloss black.
Reinstall Interior and Test
Reassemble seats, harnesses, and interior. Test for fit and rigidity.
Results
Solid 6-point GenRight Fastback cage providing excellent protection and a unique fastback profile. Ready for the trail.
Look for the cage card in the Repairs & Mods grid or the CLICK TO INSPECT buttons.